We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 21084

7.1i CORE Generator, IP1_H - On Linux platforms, the main CORE Generator GUI freezes while certain IP cores are being generated


Keywords: data driven, C++, CPP, hang, COREGen, frozen, generation, finish, update, networking, white, Java, response

Urgency: Standard

General Description:
After I properly adjusting the customization settings and select Finish to generate an IP Core, the main COREGen window freezes until the IP Core has been completely generated.

This happens on Linux and only when generating the latest version of a specific set of IP cores. A warning message appears:

"You may notice a lack of response in the application during generation."

In some instances, the CORE Generator GUI window will go completely blank.


Due to a technical problem with the JNI on Linux, multi-threading had to be turned off for the generation of these Cores. This prevents the CORE Generator GUI from being able to refresh and display messages, the progress bar, etc. during IP Core generation.

When IP generation completes, the CORE Generator GUI will refresh and display all the messages that have been posted during and at the end of generation.
AR# 21084
Date Created 03/28/2005
Last Updated 12/13/2006
Status Archive
Type General Article