UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 21126

7.1i ISE Simulator (ISIM) - ISE Simulator does not open the GUI because I am not an Administrator or Power User

Description

Keywords: simulation, simulate, privileges, administrative, administrator

Urgency: Standard

General Description:
ISE Simulator does not open the GUI because I am not an Administrator or Power User.

Solution

This is a known issue in ISE Simulator. There are certain parts of the registry that it will need to write to in order to work.

To work around this issue, log in as an administrator and change the permissions on the following four registry keys to allow ALL users to have FULL CONTROL over them, as well as the keys and values under them:

HKCR\CLSID\{9DC4A3EC-4878-11D4-93D7-0010A4C33FEB}
HKCR\CLSID\{9DC4A3EB-4878-11D4-93D7-0010A4C33FEB}
HKCR\CLSID\{6AFF8FC6-3034-11D4-93C3-0010A4C33FEB}
HKCR\CLSID\{6AFF8FC5-3034-11D4-93C3-0010A4C33FEB}

This issue will be fixed in ISE 8.1i.
AR# 21126
Date Created 09/04/2007
Last Updated 10/16/2008
Status Archive
Type General Article