We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 21136

7.1i XPower CPLD CoolRunner-II XPLA3 - XPower does not launch from within ISE Project Navigator


Urgency : Standard 


General Description: 

When a VCD file is present in the project directory or if it is specified in the ISE "Load Simulation File" option, XPower fails to launch from ISE. 


This problem only occurs for CoolRunner projects.


Until this is corrected, you can work around this issue by renaming the VCD file in the project directory to something other than <projectname>.vcd. Do NOT specify this simulation file in the ISE XPower process properties. Launch XPower and then load the simulation file after XPower is open.

AR# 21136
Date Created 09/04/2007
Last Updated 05/19/2014
Status Archive
Type General Article