We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 2129

HW-130 - programmer displays "HW-133-PG84" when TQ100 adapter is used


When I use HW-130 programmer with TQ100 adapter in place, the programmer incorrectly identifies the adapter as "HW-133-PG84".


This is an issue with v4.0 of the HW-130 software and is fixed in the latest version of the HW-130 software:


There should not be any problem continuing to use the TQ100 adapter; the programming of the device will not be affected.

AR# 2129
Date Created 08/21/2007
Last Updated 05/08/2014
Status Archive
Type General Article