We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 21323

LogiCORE Fibre Channel v2.0 - The "mod_def_0_p" symbol pin is incorrectly labeled as "moddef_0_p" in the ASY symbol file


General Description:

The ASY symbol file, used for schematic entry in ECS, that gets generated with the LogiCORE Fibre Channel v2.0 Core through CORE Generator incorrectly has the "mod_def_0_p" symbol pin labeled as "moddef_0_p".


Since only the ASY file is affected (VEO and VHO files are correct), this will affect the core only if it is used in a schematic design.

To work around this issue, edit the ASY file in the ISE Symbol Editor and change the "moddef_0_p" pin to "mod_def_0_p".

AR# 21323
Date Created 09/04/2007
Last Updated 12/15/2012
Status Active
Type General Article