We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 21380

7.1i PAR - "WARNING:Guide:55 - A possible mis-match in guide flows was detected..." when running incremental guide


Urgency: Standard

General Description:

When I am running Incremental Design in ISE 7.1i, the following warning is displayed:

"WARNING:Guide:55 - A possible mis-match in guide flows was detected while

guiding the Area Group AG_cha_fifo_inst. The file used to guide the results

may not have been generated with the correct flow."


This is a known issue with Incremental Design introduced in ISE 7.1i. If the PAR guide file has the same name as the output file, you will need to rename the guide file before using it.

This issue will be resolved in ISE 7.1i Service Pack 3.
AR# 21380
Date Created 09/04/2007
Last Updated 12/08/2011
Status Archive
Type General Article