UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 21456

7.1i ChipScope Pro - "ERROR: Cse abort command"

Description

General Description: 

When ChipScope Analyzer 7.1 tries to connect to the cable, the following error message occurs : 

 

"COMMAND: open_parallel_cable PROXYTYPE=xilinx_parallel4 FREQUENCY=200000 PORT=LPT1  

INFO: Cable connection established. 

INFO: Using download cable in compatibility mode. 

ERROR: Cse abort command 

INFO: Successfully opened Xilinx Parallel Cable 

INFO: Cable: Parallel Compatibility Mode, Port: LPT1, Speed: 200 KHz 

ERROR: Cse abort command 

INFO: Found 0 Core Units in the JTAG device Chain."

Solution

This has been fixed in the first service pack of ChipScope Pro 7.1.

AR# 21456
Date Created 09/04/2007
Last Updated 05/19/2014
Status Archive
Type General Article