We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 2147

XACT_CPLD Hitop - This program has performed an illegal operation.....


Keywords: XACT, CPLD, illegal

When you run Optimizer/Partitioner Version XACT_CPLD-V6.0.2f,
it starts to read the .xff file and you may get the following


This program has performed an illegal operation and will be
shut down.

If the problem persists, contact the program vendor

Hitop cause an invalid page fault in module hitop.exe.


If the design entry tool is Symplify this may be due to syntax
errors in your vhdl design that were not picked up by the
synthesis syntax check.

Check for inconsistances in bus/address widths especially when
making comparisons between them.
AR# 2147
Date Created 08/31/2007
Last Updated 10/06/2008
Status Archive
Type General Article