UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 21612

7.1i CORE Generator - COREGen _wincg.exe - Entry Point Not Found

Description

Keywords: ISE7.1, CORE, CORE Generator, COREGen, Coregen, IP_update, wingc, java, update installer

Urgency: Standard

General Description:
After using the Updates installer in CORE Generator, to apply the IP_update #1, I can no longer use CORE Generator. When I launch the tool I receive the following error message:

---------------------------
_wincg.exe - Entry Point Not Found
---------------------------
The procedure entry point ?JavaGuiOpen@JavaVMSingleton@Coreu@@SAEXZ could not be located in the dynamic link library libCoreu_Base.dll.
---------------------------
OK
---------------------------

Solution

This problem has been seen when the Updates Installer is used to upgrade CORE Generator. In a few cases, the Updates Installer has not completed the installation which resulted in a mismatch in DLL versions.

To work around the problem, use the manual installation method to apply the IP_update.

Details on the installation method can be found in (Xilinx Answer 21019), 7.1i IP Update #1 CORE Generator - Release Notes and Known Issues for CORE Generator ISE 7.1i IP Update 1.

AR# 21612
Date Created 06/20/2005
Last Updated 12/13/2006
Status Archive
Type General Article