We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 21794

7.1 System Generator for DSP - Why is an error reported when I try to implement PicoBlaze in a Virtex-II Pro or Virtex-4?


I attempt to implement PicoBlaze in a Virtex-II Pro or Virtex-4 device, an error is reported.


This is a known problem that will be fixed in System Generator for DSP 8.1.  


Meanwhile, you can to work around the problem by using the netlist flow and generating your design for a Virtex-II device. You can then change the project to Virtex-II Pro and implement the design in the ISE Project Navigator.

AR# 21794
Date Created 09/04/2007
Last Updated 05/19/2014
Status Archive
Type General Article