We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 21836

7.1 PlanAhead - Why does the console show an error on my timing constraint?


Keywords: PlanAhead, syntax, constraint,support, log

When I import my ".ucf", I receive an error in the console and the "planAhead.log" that the timing constraint syntax is not supported. What should I do?


Xilinx recommends following the ucf and edif constraint syntax defined in the Software Manuals.

If you have followed the recommended syntax and these errors are still occurring, please open a WebCase with Xilinx Technical Support:
AR# 21836
Date Created 07/28/2005
Last Updated 03/27/2007
Status Archive
Type General Article