UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 219

Global reset signal name for FPGAs/EPLDs

Description

How do I access the master reset in OrCAD?

Solution

Although it may not appear on the schematic (if the STARTUP block

is not used), the global reset signals for the XC2000, XC3000, XC4000, XC5200

and XC7000 family devices can be accessed in simulation via the following

names:

2000, 3000, 5200 : GR

4000 : GSR

7000 : PRLD

NOTE: If using pre-XACT 5 software, the name of the 2k/3k reset signal

is GLOBALRESET-.

AR# 219
Date Created 08/31/2007
Last Updated 05/13/2010
Status Archive
Type General Article