AR# 21931 Platform Cable USB - If iMPACT is not shut down properly while the USB cable is connected, the connection must be reset manually

Keywords: config, lock

If iMPACT is not properly closed while the USB cable is being used, the following error occurs:

"Cable is LOCKED. Retrying...
The cable is being used by another application.
Please try opening the cable connection at a later time."

To release the cable, you must run iMPACT in batch mode by opening a command line and entering the following lines:

impact -batch
AR# 21931
Date Created 09/04/2007
Last Updated 03/20/2009
Status Active