We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 22041

LogiCORE SPI-4.2 (POS-PHY L4) Lite v3.0 - "ERROR:sim:158 - Tcl error detected while configuring symbol pins."


When "ASY Symbol File" option has been selected in the CORE Generator project option, the following error occurs after generating the core: 


"ERROR:sim:158 - Tcl error detected while configuring symbol pins. 

ERROR:sim:159 - An internal error has occurred. Closing SPI-4.2 Lite GUI. 

Finished Generating."


This error occurs because there is no Symbol file available for this core. 


Deselect the ASY Symbol File option and try generating the core again.  


If you are creating a schematic design, and need the symbol file, contact Xilinx Technical Support: 


This issue has been fixed in SPI-4.2 Lite v4.1 Core available with ISE 8.2i IP Update #1. Please upgrade to the latest core.

AR# 22041
Date Created 09/04/2007
Last Updated 05/19/2014
Status Archive
Type General Article