UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 22097

11.1 PACE - Pin-out in Package View (Top View) for XC264A-7QFG48 does not match the Data Sheet

Description


Keyword: PACE, pin-out, pinout, Package, View, Top, XC264A, CoolRunner  
 
When I look at the Top View displayed in the Package View of the PACE tool GUI for the package QFG48, it does not match the Top View in the Data Sheet. The pin numbers are increasing in counter-clockwise order in the GUI.  
 
Which view should I refer to, to build my PCB?

Solution


The Top View shown in the Data Sheet should be used along with the package drawing. 
 
The package drawing can be found on the Data Sheet page: 
http://www.xilinx.com/xlnx/xweb/xil_publications_index.jsp
AR# 22097
Date Created 09/04/2007
Last Updated 05/20/2014
Status Archive
Type General Article