UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 22116

7.1i EDK - "WARNING:MDT - Peripheral dcm_0 is not connected to any of the processors in the system."

Description

Keywords: DCM, XPS, MPD, IP

Urgency: Standard

General Description:
When I use a DCM in an embedded design, the following warning appears:

"Performing System level DRCs on properties...
WARNING:MDT - Peripheral dcm_0 is not connected to any of the processors in the
system. Check for the following reasons.
1. dcm_0 is not connected to any of the buses connected to a processor.
2. dcm_0 does not have adresses set correctly.
3. dcm_0's address is not within any of the bridge windows connected to a
processor."

Solution

This warning can be safely ignored. There is an improper specification (IPTYPE=PERIPHERAL, rather than IPTYPE=IP) in the DCM's MPD file. This issue has been resolved in the next major release.
AR# 22116
Date Created 09/20/2005
Last Updated 04/16/2007
Status Archive
Type General Article