AR #22207 - 8.1i ISE - When creating a new Verilog or VHDL source using the Project Navigator New Source Wizard, I find that there are only 12 cells available for Port Name entry

All Recent Answers

Search Answers Database

8.1i ISE - When creating a new Verilog or VHDL source using the Project Navigator New Source Wizard, I find that there are only 12 cells available for Port Name entry

AR#	22207
Part	SW-Project Navigator
Last Modified	2008-03-26 00:00:00.0
Status	Archive
Keywords	VHDL, Verilog, new source, wizard, port names, table, pins

Description

Keywords: VHDL, Verilog, new source, wizard, port names, table, pins

Urgency: Standard

General Description:
When creating a new HDL source, using the New Source Wizard, I find that here is a table entry form provided to enter all of the HDL port names. In 8.1i, there are only twelve rows available to enter port names, and there does not seem to be a way to add more.

Solution

You should be able to add as many ports as needed. However, the scroll mechanism for this table was incorrectly associated only with Bus, MSB and LSB columns. You can click any of these columns in the last row of the table to activate scrolling and then add as many ports as desired.