UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 22268

10.1 PACE - When using PACE to create the UCF of a top-level schematic macro targeting a CoolRunner XPLA3, the pin name in the schematic of the macro is different from the one in the UCF

Description

When using PACE to create the UCF of a top-level schematic macro targeting a CoolRunner XPLA3, the pin name in the schematic of the macro is different from the one in the UCF.

Solution

To work around this issue, create an HDL wrapper for your top-level schematic.

AR# 22268
Date Created 09/04/2007
Last Updated 12/15/2012
Status Active
Type General Article