UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 22288

8.2 / 8.1 / 7.1i SP2 EDK/RTOS - How can I run Linux image in ML403?

Description

I have ML403 platform and MontaVista Linux Pro 3.1 development tools. At present, the MontaVista tools officially support only ML300-based platforms. How can I target ML403 when creating a Linux image?

Solution

Obtain the MontaVista LSP for the ML300, and then go to the following link: 

 

7.1 

http://www.xilinx.com/products/boards/ml403/files/ml403_emb_ref_ppc_71.zip
 

8.2 and 8.1 

http://www.xilinx.com/products/boards/ml403/files/ml403_emb_ref_ppc_81.zip
(ML403 EDK Embedded PowerPC Reference Design ) 

 

The downloaded zip file contains a patch to the ML300 LSP that allows the Linux image to run properly on an ML403 board.  

 

An official LSP, specifically for the ML403, is currently in the works at MontaVista.

AR# 22288
Date Created 09/04/2007
Last Updated 05/19/2014
Status Archive
Type General Article