We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 22345

9.1i TMRTool - External Active High/Low setting not correctly implemented after it has been modified


If the project is initially implemented with one setting, and later on the power source setting is changed from external active High to Low (or vice versa), the new setting will not be implemented. The View XTMR design will show up with the old implementation as well as the output EDIF file.


To work around this issue, set the top-level source again and reimplement the design.

AR# 22345
Date Created 09/04/2007
Last Updated 05/19/2014
Status Archive
Type General Article