We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 2239

M1.5 LOGIBLOX: LogiBLOX will not always stop on a DRC warning.


Keywords: DRC, LogiBLOX, stop on warning

Urgency: Standard

General Description:
The Setup menu in LogiBLOX has a "Stop on Warning" option.
LogiBLOX will not stop on a DRC warning, only Module Expansion
warnings. A sample DRC warning is:

"Both input and ouput clock enable pins are used. The design
will fail down the flow unless both clock-enable pins are
connected to the same signal."


Check the logiblox.log file for DRC type warnings.
AR# 2239
Date Created 08/31/2007
Last Updated 02/08/2001
Status Archive