UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 22438

8.1i ISE / EDK - ERROR:ProjectMgmt - TOE: ITclInterp::ExecuteCmd gave Tcl result 'can't execute ".\_NotHere": no such file or directory'

Description

Keywords: xmp, system_tub, xps, EDK, processor, embedded

Urgency: Standard

General Description:
When Synthesizing a design containing an instantiated XPS processor, Project Navigator issues the following error:

ERROR:ProjectMgmt - TOE: ITclInterp::ExecuteCmd gave Tcl result 'can't execute ".\_NotHere": no such file or directory'.
Tcl_ErrnoId: unknown error
Tcl_ErrnoMsg: No error
_cmd: ::xilinx::Dpm::dpm_chDUPeerTransformExecute dpm_xpsSynthesize $piThisInterface
errorInfo: can't execute ".\_NotHere": no such file or directory
while executing
"::xilinx::Dpm::bgexec ::xilinx::Dpm::TOE::execStatus -keepnewline true -onoutput ::xilinx::Dpm::TOE::execWarningHandler -onerror execProcessError "./_..."
("eval" body line 1)
invoked from within
"eval ::xilinx::Dpm::bgexec ::xilinx::Dpm::TOE::execStatus -keepnewline true -onoutput $stdoutProc -onerror $stderrProc $Cmd $args &"
(procedure "::xilinx::Dpm::TOE::exec" line 23)
invoked from within
"::xilinx::Dpm::TOE::exec $_NewCmd"
(procedure "dpm_flowUtilsExec" line 102)
invoked from within
"dpm_flowUtilsExec $_cmd"
(procedure "dpm_xpsVerifyDeviceSettings" line 22)
invoked from within
"dpm_xpsVerifyDeviceSettings $_xmpFilePath $_iDesign "
(procedure "dpm_xpsSynthesize" line 28)
invoked from within
"$_Cmd $piTransformInstance $_CmdArgs"
(procedure "dpm_chTransformExecute" line 132)
invoked from within
"dpm_chTransformExecute $_flowProc $piInterface"
(procedure "::xilinx::Dpm::dpm_chDUPeerTransformExecute" line 8)
invoked from within
"::xilinx::Dpm::dpm_chDUPeerTransformExecute dpm_xpsSynthesize $piThisInterface"

Solution

This error message will be issued if EDK has not been properly installed or is not found by Project Navigator.

In ISE 8.1.01i (the first service pack for ISE 8.1i), Project Navigator messaging is enhanced to indicate that EDK is not available and the ".xmp" source will not be allowed in the Project Navigator project when EDK is not found.

To synthesize and implement a design containing XPS modules, please install EDK and Service Pack #1 for ISE.

AR# 22438
Date Created 09/04/2007
Last Updated 03/26/2008
Status Archive
Type General Article