We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 22571

8.1i ISE/CORE Generator - "ERROR (dpm_coregenDoCoreRegen): could not get required Target Language value"


Keywords: generate, COREGen

When I run the Regenerate Core process on an ".xco" source in an EDIF or NGC/NGO project, the following error occurs in the console window (similar to the edif_flow ISE Example):

"ERROR (dpm_coregenDoCoreRegen): could not get required Target Language value."


To work around this issue, launch Manage Cores from Project Navigator and regenerate the core from the CORE Generator GUI.

This issue is fixed in the latest 8.1i Service Pack, available at:
The first service pack containing the fix is 8.1i Service Pack 1.
AR# 22571
Date Created 12/16/2005
Last Updated 01/09/2006
Status Archive
Type General Article