8.1i ISE - When I try to open a CDC file from Library View, Project Navigator reports "ERROR:ProjectMgmt - TOE: ITclInterp::ExecuteCmd gave Tcl result 'invalid command name "0"'

AR#	22575	Search For Another Answer
Topic	SW-Project Navigator
Last Updated	03/26/2008
Status	Archive

Description

Keywords: ChipScope

The following error appears in the Transcript window when I open a CDC file from the Library tab view of Project Navigator.

ERROR:ProjectMgmt - TOE: ITclInterp::ExecuteCmd gave Tcl result 'invalid command name "0"'.
Tcl_ErrnoId: unknown error
Tcl_ErrnoMsg: No error
_cmd: ::xilinx::Dpm::dpm_chSNEditOperationWithUpdate $piThisInterface
errorInfo: invalid command name "0"
while executing
"$_iSourceDUNode GetViewContext _IView"
(procedure "dpm_chipscopeEditCdc" line 53)
invoked from within
"$_sEditor $_sFilePath $_iDUInstance $_iDesign $_iSourceDUNode $_editMode "
(procedure "dpm_chDUEditOperation" line 28)
invoked from within
"dpm_chDUEditOperation $_iInterface"
(procedure "::xilinx::Dpm::dpm_chSNEditOperationWithUpdate" line 14)
invoked from within
"::xilinx::Dpm::dpm_chSNEditOperationWithUpdate $piThisInterface"

Solution

To open the CDC file, please open the Sources view in Project Navigator and open the CDC file from there.

This problem has been fixed in the latest 8.1i Service Pack available at:
http://www.xilinx.com/xlnx/xil_sw_updates_home.jsp
The first service pack containing the fix is 8.1i Service Pack 1.