We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 22592

8.1i ISE - Generate Power Data results in the following error: "ERROR:Power:101 - aspartan3 devices are not supported in this product"


Keywords: xpower, automotive, fails

Urgency: Standard

General Description:
When I run Generate Power Data on an Automotive Spartan-3 device, an error similar to the following occurs:

"Started : "Generate Power Data".
EQUIVTESTMODE: _EquivExe is 'xpwr'
EQUIVCMD: xpwr -intstyle ise flash.ncd flash.pcf -wx flash_xpwr.xml -o flash.pwr
Time spent 600 ms: active tasks: 0
"flash" is an NCD, version 3.1, device xa3s50, package vqg100, speed -4
Design load 35% complete
ERROR:Power:101 - aspartan3 devices are not supported in this product."


The Generate Power Data option was inadvertently left in the Project Navigator GUI under the Place & Route Processes, and is not supported for Spartan-3 devices.
AR# 22592
Date Created 09/04/2007
Last Updated 03/26/2008
Status Archive
Type General Article