UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 22636

8.1i iMPACT - Error message: "'2': Verifying device...Failed at address, 0'2': Verification Terminated"

Description

When I try to run a verify on a Platform Flash PROM in iMPACT 8.1i, it fails as follows:

Command: Program -p 1 -e -v -defaultVersion 0

// *** BATCH CMD : Program -p 2 -e -v -defaultVersion 0

PROGRESS_START - Starting Operation.

Chain TCK freq = 15000000.

Validating chain...

Boundary-scan chain validated successfully.

'2': Erasing device...

Erasure completed successfully.

'2': Programming device...

done.

'2': Putting device in ISP mode...done.

'2': Putting device in ISP mode...done.

'2': Verifying device...Failed at address, 0'2': Verification Terminated

Programming of user selected options failed.

PROGRESS_END - End Operation.

Elapsed time = 10 sec.

Solution

This problem is fixed in iMPACT 8.1i Service Pack 1.

AR# 22636
Date Created 09/04/2007
Last Updated 12/15/2012
Status Active
Type General Article