We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 22829

8.1i EDK - Incorrect values are read back from ISOCM through XMD


A "rst" command in XMD corrupts the ISOCM if it is mapped to the reset vector. 


Also, after an ISOCM read, the ISCNTL register is cleared.


This problem has been fixed in the latest EDK 8.1i Service Pack, available at: 

The first service pack containing the fix is EDK 8.1i Service Pack 1.

AR# 22829
Date Created 09/04/2007
Last Updated 05/19/2014
Status Archive
Type General Article