We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 22969

8.1 AccelDSP Synthesis Tool - How can I load MATLAB data files in the design function?


How can I load MATLAB data files in the design function?


You can load ASCII text files in the design function, but you must assign them to a variable, as follows: 


1. Save the data to an ASCII file. For example, in the script file you might have a statement such as the following: 

save myrom.txt -ascii myrom; 

2. In the design function, load the data and assign it to a variable: 

sinerom = load('sinerom.txt'); 

The ASCII files allows the quantizer to see the values.  

You cannot load binary files or use a statement such as "load -ascii myrom.mat" that does not assign the data to a variable. If there is a problem, it is reported in the Analyze step.

AR# 22969
Date Created 09/04/2007
Last Updated 05/20/2014
Status Archive
Type General Article