UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 23127

8.1 System Generator for DSP - Why do I get an "ERROR:Data2MEM:37" error when targeting Ethernet Hardware In The Loop (HITL), after updating to 8.1i ISE Service Pack 2 (SP2)?

Description

Why do I get an "ERROR:Data2MEM:37" error when targeting Ethernet Hardware In The Loop (HITL), after updating to 8.1i ISE Service Pack 2 (SP2)?

An example of this type of error message is: "ERROR:Data2MEM:37 - Illegal file or path name symbol 'D:\test\netlist_ethernet_001/test_cw_bd.bmm'."

Solution

This is a known problem with the way that Datat2MEM is called from System Generator for DSP 8.1. The problem has been fixed in System Generator for DSP 8.1 Service Pack 1 (8.1.01), which will be available in April 2006.

AR# 23127
Date Created 09/04/2007
Last Updated 12/15/2012
Status Active
Type General Article