We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 23168

7.1i ISE Simulator (ISIM) - Cannot find hierarchical parameter name xxx.INIT


Keywords: schematic, tbw, project, nav, behavioral, simulation

When I generate a TBW for a schematic and try to run a behavioral simulation, the following error occurs:

"Simulator - Can not find hierarchical param name xxxx.INIT. "
"Simulator:34 - Elaboration failed"


This issue is fixed in ISE 8.1i.

If you are using ISE 7.1i, start a new project and select Generated Simulation Language as VHDL, and retry the design.
AR# 23168
Date Created 09/04/2007
Last Updated 10/16/2008
Status Archive
Type General Article