UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 23169

8.1i CORE Generator - Cannot generate IP CORE after installing ISE 8.1i Service Pack 3

Description

Keywords: customize, finish, hang, slow

After installing ISE 8.1i Service Pack 3, I cannot generate an IP core.

For some cores, such as the PCI 64 cores, launching the core customization GUI fails after it gets to ~40%.

Other cores appear to be generating but take a long time, or get to 98% and do not complete.

Solution

ISE 8.1i SP3 contains two CORE Generator ".jar" files that are out of sync with 8.1i IP Update 1.

If ISE 8.1i SP3 was installed or downloaded before March 29th, 2006, then 8.1i IP Update 1 must be reinstalled over 8.1i Service Pack 3 to successfully generate IP COREs.

To download 8.1i IP Update 1, go to:
http://www.xilinx.com/xlnx/xil_sw_updates_home.jsp?update=ip
AR# 23169
Date Created 09/04/2007
Last Updated 03/04/2008
Status Archive
Type General Article