UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 23255

8.1i ISE - Project Navigator does not show processes in the process window; only Design Summary and process reports are shown

Description


I open a project, but when I select the top-level source file, only Design Summary and process reports show in the Process Window.



None of the typical processes (synthesize, Translate, MAP, etc.) for the source are visible. If I try to open a report, the corresponding process and any previous processes required to create the report are run, but there is no way to change the process options.

Solution


This will happen if the project file (.ise) has a READ-ONLY property.



1. Close the project and give write permission for the ".ise" file.

2. Then, re-open the project.
AR# 23255
Date Created 09/04/2007
Last Updated 05/12/2011
Status Archive
Type General Article