UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 23262

8.2i ISE - Project Navigator shows that MAP failed, but there are no errors in my MAP report

Description

When I run implementation, the console indicates that MAP failed (with no other error messages). There are no errors listed in my MAP report (".mrp" file). Why does Project Navigator indicate an error?

Solution


This issue is caused by a design tool bug that incorrectly sets the MAP status in the project file (".ise" file).



In most cases, you can work around this problem by switching the project target device, then switching back to the original target device.



Optionally, creating a fresh project in a new directory and adding the same sources to the new project will also solve the problem. It is a good idea to frequently archive or take a snapshot of the project to be able to restore project status.



The user projects which have exhibited this problem all showed the same project/file disconnect.



This problem has been fixed in the latest 8.2i Service Pack available at:

http://www.xilinx.com/xlnx/xil_sw_updates_home.jsp
The first service pack containing the fix is 8.2i Service Pack 1.
AR# 23262
Date Created 09/04/2007
Last Updated 05/25/2011
Status Archive
Type General Article