We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 23265

8.1i Schematic Editor - Schematic text appears larger when opened in ISE 8.1i compared to when opened in ISE 7.1i


Keywords: overlapping, size, width

When a Schematic design that is completed in ISE 7.1i is brought into ISE 8.1i, the text font size appears larger than before. In some cases, the larger font might cause overlapping of adjacent text fields. Viewing the text properties shows that the font is the same style and type in both software versions.


The font size that is seen in Schematic Editor in ISE 8.1i is the correct font size.

The font size in 7.1i Schematic Editor actually appeared smaller than it should have, and this problem was corrected in ISE 8.1i.
AR# 23265
Date Created 09/04/2007
Last Updated 03/05/2008
Status Archive
Type General Article