UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 23423

8.2i Virtex 5, Cross-Probing - The complete path is not shown in Floorplan-Implemented tab

Description

When I select a path from the Timing tab or the timing report, after launching Analyze Post-Place & Route Static Timing, and right-mouse-click Cross-Probe to Floorplan-Implemented, the complete path is not shown in the Floorplan-Implemented tab.

Solution

To work around this issue, use Floorplanner or FPGA Editor to view the paths.

This problem has been fixed in the latest 8.2i Service Pack available at:

<http://www.xilinx.com/xlnx/xil_sw_updates_home.jsp>
The first service pack containing the fix is 8.2i Service Pack 1.

AR# 23423
Date Created 09/04/2007
Last Updated 01/18/2010
Status Archive
Type General Article