LogiCORE Multiplier v9.0 - I cannot add handshaking signals to my multiplier. Why?

AR#	23598	Search For Another Answer
Topic	IP-DSP Horizontal
Last Updated	04/06/2009
Status	Active

Description

Keywords: mult, COREGen, core, Generator, v8.0, v9.0, CORE, CORE Generator

I cannot add handshaking signals to my multiplier. Why?

Solution

It was found that in most cases handshaking, like the latency, is fixed. Thus, the handshaking signals were removed from the multiplier core. If you find these signals necessary, they are available in Multiplier v7.0.