UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 237

Programming XC7000 part with a JEDEC file gives checksum error

Description

Attempting to program an XC7000 part using the .JED file
produced by MAKEPRG will result in a checksum error.

The JEDEC file produced by MAKEPRG for XC7000 parts is not a
valid programming file.

Solution

The JEDEC file produced by MAKEPRG for XC7000 parts is not a
valid programming file.

Use MAKEPRG to generate a .PRG programming file.
AR# 237
Date Created 09/20/1995
Last Updated 01/15/2003
Status Archive
Type General Article