UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 2373

VERILOG-XL: Error! Identifier (glbl) not defined [Verilog-IDNOD]

Description

Keywords: verilog-xl, verilog, glbl

Urgency: Standard

General Description:
When trying to load design for Verilog simulation, the following error is
issued within Verilog-XL:

Error! Identifier (glbl) not defined [Verilog-IDNOD]

Solution

This error is a result of the non-usage of the glbl.v module during the
compilation and loading of the design. The glbl.v module enables the
use of the global set/reset in the design, and it is referenced by the
UNISIMS and the SIMPRIMS libraries. The glbl.v module at the following
location, $XILINX/verilog/src/glbl.v, and needs to be both compiled
and loaded in the simulation process.

Please see (Xilinx Solution 6701) on how to run simulation using Verilog-XL.

For more details on the usage of the glbl.v module see
(Xilinx Solution 6537)
AR# 2373
Date Created 06/09/1997
Last Updated 05/05/2004
Status Archive
Type General Article