We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 23741

8.2i EDK - MicroBlaze version 5 floating point division works only if integer divider is enabled


The floating point instruction (fdiv) in MicroBlaze version 5 does not seem to work.


The integer divide (C_USE_DIV) parameter must be turned on in order for the floating point divide to work. 


These problems have been fixed in the latest EDK 8.2i Service Pack, available at: 

The first service pack containing the fix is EDK 8.2i Service Pack 1.

AR# 23741
Date Created 09/04/2007
Last Updated 05/20/2014
Status Archive
Type General Article