UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 23813

8.2 System Generator for DSP - Why do I receive errors when I try to implement the FFT v1.0 with Synplify Pro?

Description

Why do I receive errors when I try to implement the FFT v1.0 with Synplify Pro?

Solution

The ways to work around this problem are as follows: 

 

1. Remove the FFT EDIF file from the Synplify Pro Project. 

 

2. Use XST for the Synthesis Tool, for those cases where you cannot remove the FFT EDIF from the Synplify Pro Project. 

 

3. When possible it recommended that you update to the latest FFT block, rather than using the FFT v1.0.

AR# 23813
Date Created 09/04/2007
Last Updated 05/20/2014
Status Archive
Type General Article