The TEMAC Loopback test generated by the BSB for the ML410 board reports "Test Failed".
ML410 8.2i TestApp_Peripheral
Starting with EDK 8.2i SP1 Base System Builder (BSB) can be used to generate an ML410 design that contains a hard_temac peripheral. The BSB generated TestApp_Peripheral code used to perform a quick TEMAC loopback test needs to be changed to use the production ML410 PHY address.
In the file xtemac_example.h, perform the following edit:
#define TEMAC_PHY_ID 0
#define TEMAC_PHY_ID 7
For additional information regarding the PHY address settings for the ML405 and ML410 see (Xilinx Answer 23948)
Also add the usleep(1000000); function call to the "xtemac_example_util.c" source file as illustrated below:
Status = XTemac_PhyWrite(TemacInstancePtr, TEMAC_PHY_ID, 20, PhyReg20);
Status |= XTemac_PhyWrite(TemacInstancePtr, TEMAC_PHY_ID, 0, PhyReg0 | PHY_R0_RESET);