We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 24089

8.2i EDK - BSB creates incorrect EMC block for ML501


When choosing to use the flash device on the ML501 board, the Base System Builder (BSB) sets the MEM_WIDTH paramter to 32 when there are only 16 bits on the hardware flash device.


These problems have been fixed in the latest EDK 8.2i Service Pack, available at:  

The first service pack containing the fix is EDK 8.2i Service Pack 2.

AR# 24089
Date Created 09/04/2007
Last Updated 05/20/2014
Status Archive
Type General Article