UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 24091

8.2i EDK - The SRAM memory test application does not work on the ML501 board

Description

The SRAM memory test application does not work on the ML501 board because of improperly set parameters.

Solution

In the .mhs file, under the opb_emc hardware, remove the following line:

PARAMETER C_INCLUDE_NEGEDGE_IOREGS = 1

and add this line:

PARAMETER C_SYNCH_PIPEDELAY_0 = 2

These problems have been fixed in the latest EDK 8.2i Service Pack, available at:

http://www.xilinx.com/xlnx/xil_sw_updates_home.jsp
The first service pack containing the fix is EDK 8.2i Service Pack 2.

AR# 24091
Date Created 09/04/2007
Last Updated 12/15/2012
Status Active
Type General Article