UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 24263

8.2.01 System Generator for DSP - How can I change the implementation options for the Timing Analysis flow?

Description

How can I change the implementation options for the Timing Analysis flow?

Solution

There is currently no direct way to do this. However, you can use the following steps if you need to change the implementation options:

1. Select the Timing Analysis as your target.

2. Generate the design.

3. Go into the target directory and modify the ".opt" (Xilinx XFLOW options) file with the changes to the implementation options that you need.

4. Run XFLOW with theses new options in the same directory.

5. Run the xlTimingAnalysis command at the MATLAB command prompt, and point to your net translation file and your new output trace report.

(Type xlTimingAnalysis without any arguments to see the help.)

AR# 24263
Date Created 09/04/2007
Last Updated 12/15/2012
Status Active
Type General Article