Main
Home  :  Support  :  Answers  :  11.3 System Generator for DSP - I cannot generate an NGC, Bitstream, Timing Analysis, or Hardware in the loop target when using Synplify as my synthesis tool. Why?

11.3 System Generator for DSP - I cannot generate an NGC, Bitstream, Timing Analysis, or Hardware in the loop target when using Synplify as my synthesis tool. Why?

AR# 24273

Search For Another Answer
Topic SW-SysGen
Last Updated 09/10/2009
Status Active
Description

Keywords: MATLAB, Simulink, Synplicity, license, network, float, node-locked

I cannot generate an NGC, Bitstream, Timing Analysis, or Hardware in the loop target when using Synplify as my synthesis tool. Why?

Solution

This issue occurs because Synplify requires a floating license to run in batch mode, and all of the flows listed above use Synplify in batch mode.

If you have a floating license, you will be able to run any of the flows supported by System Generator for DSP.
 
 
/csi/footer.htm