We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 24429

9.1isp1 Floorplan Editor - When reloading the design in Floorplan Editor, crossprobe from IOB table is not completed


I have created some IOB constraints in Floorplan Editor and reimplemented the design (leaving FPE loaded).  


Looking at the Design Summary and doing a crossprobe to an IOB from the IOB table, the requested IOB is not selected.


To work around this, go back to the Design Summary and select the IOB again.

AR# 24429
Date Created 09/04/2007
Last Updated 05/21/2014
Status Archive
Type General Article