UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 24521

LogiCORE Viterbi Decoder v6.0 Patch - Release Notes/README

Description

Keywords: BER, plots, Decoder

This Answer Record contains the Release Notes for the CORE Generator Viterbi Decoder v6.0 rev 1 Patch.

Solution

Patch Install Instructions for 8.2.03i IP Update 3

1. Before you install this patch, ensure that you have the following installed on your machine.

NOTE: If you need any of the service packs, libraries, or IP Updates, you can obtain them from the Download Center at:
http://www.xilinx.com/xlnx/xil_sw_updates_home.jsp

- ISE 8.2i
- ISE Service Pack 3
- CORE Generator 8.1i IP Update #3

2. Download the Viterbi Decoder v6.0 patch from:

http://www.xilinx.com/txpatches/pub/swhelp/coregen/Viterbi_v6_0_rev1.zip

3. Extract the Viterbi_decoder_v6_0_rev1.zip to your %Xilinx% install directory.


Patch Fixes

Issue: For constraint length 9, the BER performance is not optimal at high SNR
Symptom: At higher SNR, for constraint length 9, the BER plots show an error floor


Please see (Xilinx Answer 29448) for a detailed list of LogiCORE Viterbi Decoder Release Notes and Known Issues.

AR# 24521
Date Created 09/04/2007
Last Updated 05/13/2009
Status Archive
Type General Article