UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 24527

LogiCORE RapidIO v3.1 Rev 2 - duplicated packet can be seen upon RETRY

Description

When the buffer asserts discontinue (lnk_rdst_dsc_n) signal back to the PHY Rx a cycle before or in the same cycle as an embedded control symbol, the PHY will not properly discontinue the current packet. This will cause the packet to be duplicated upon Retry.

Solution

This issue will be fixed in Serial RapidIO v4.1 release expected to be available in February 2007. 

 

If you need a fix for this issue sooner, please contact Xilinx Technical Support at: 

www.xilinx.com 

or 

http://www.xilinx.com/support/techsup/tappinfo.htm
 

Please provide three XCO files from v3.1 core.

AR# 24527
Date Created 09/04/2007
Last Updated 05/21/2014
Status Archive
Type General Article