We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 24544

9.1i Install - Installation Instructions for Virtex-5 LX220T/SXT devices


Keywords: SP1, Solaris, Linux, Windows, software, update, device

To install support for Virtex-5 LX220T and SXT devices, your ISE version must match the Virtex-5 Device Installer version or a "No Updates to Install" message will be displayed.

For each subsequent service pack release, you must rerun this device installer to stay up-to-date. Installation Instructions using the Download Center file are below. If you are using WebUpdate from ISE, the update will be installed automatically.

NOTE: This update is not available for ISE WebPACK users.


Download Center Installation Instructions

1. Download "9_1_0xi_v5_lx220t_sxt.zip" from the Service Pack display page.

2. Unzip the file to an empty "staging" area that is separate from your Service Pack staging directory.

Linux Example:

mv 9_1_0xi_v5_lx220t_sxt.zip /home/<staging_dir>
cd /home/<staging_dir>
unzip 9_1_0xi_v5_lx220t_sxt.zip

3. Run setup(.exe).
AR# 24544
Date Created 09/04/2007
Last Updated 05/01/2009
Status Archive
Type General Article