We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 24661

Chipscope: Using Chipscope on an FPGA in a serial Daisy chain


When I attempt to debug my Design using Chipscope Analyzer on a device in a Serial Daisy chain DONE does not go high on the device?


If the DONE pins are connected together you will see this behavior. If the other FPGAs are not configured DONE will be help low and the device will not start up.

AR# 24661
Date Created 01/02/2013
Last Updated 01/02/2013
Status Active
Type General Article